This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region
POLYINJECT EP
Description
Two component low viscous epoxy resing injection for sealing cracks and strengthening structures.
Polyinject EP is a 2-component injection resin on epoxide basis with specific chemical and physical properties to seal and bond cracks of widths between 0.05 mm and 10 mm. Due to its low mixture viscosity Polyinject EP can be applied pressure less as priming resin for concrete renovations or with injection pumps for injections. The particular material basis of Polyinject EP makes application even on slightly moist surfaces possible (see pull-off resistance).
Properties
- Low viscosity allows penetration into the finest cracks
- Suitable for structural repairs
- Excellent bond to concrete, brick and masonry
- Excellent bond also to moist substrates
- Minimum creep under sustained load
- Resistant to wide range of chemicals
- Non-shrink, adheres with no loss of bond
- Can be applied pressure less and with pumps