POLYPOXY CT

Description

Bitumen modified epoxy coating

 

Polypoxy CT is a two component bitumen modified liquid epoxy resin coating. Polypoxy CT is a high build, dense, coating designed to protect concrete and metal structures

Properties

  • Excellent chloride & sulphate resistance 
  • High build coating, no primer required 
  • Excellent long term corrosion protection 
  • Abrasion resistant 
  • Seam less finish 
  • Easy to apply – can be applied by brush, roller or spray. 
  • Economical

Documents and Downloads

Technical Data Sheet
POLYPOXY CT
Download TDS

This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region

Step by step

SURFACE PREPARATION

Surface to be coated with Polypoxy CT should be structurally sound, dimensionally stable, clean and free from laitance, oil or any other contaminants. Grit blasting is recommended for complete removal of deleterious materials and other contaminants which will affect the adhesion from the substrate.

MIXING

Mix part A and part B separately for a minute and then transfer Part B (reactor) to Part A (base) and mix thoroughly for 2 –3 minutes to get a uniform homogenous consistency. Use a slow speed electric drill with a proprietary mixing paddle.

APPLICATION

Polypoxy CT can be applied by brush, short hair roller or airless spray. Apply the mixed material to a properly prepared substrate to achieve a uniform coating with minimum wet film thickness of 200 microns. Subsequent coats shall be applied after the coating achieves its initial cure.