POLYRELEASE WB

Description

Water based mould release agent

 

Polyrelease WB is a water based release agent, with excellent release properties and superior to those of conventional mould oils. Polyrelease WB on application to the moulds provides a water repellent interface and ensures an even color, texture and uniform smooth finish to the concrete.

Properties

  • Non staining. 
  • Non hazardous, nontoxic. 
  • Ensuring fair faced concrete. 
  • Suitable for all types of form work

Documents and Downloads

Technical Data Sheet
POLYRELEASE WB
Download TDS

This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region

Step by step

Surface of forms/shutter shall be clean and rust free. All traces of adherent materials in the form work must be removed prior to use. Polyrelease WB may be applied by fine brush or conventional mould oil sprayer ensuring a light continuous film. Excessive application should be avoided. In case of new timber/plywood, an initial spray coat may be required to seal the pores on the surface.

Polyrelease WB on application to the surface shall be kept undisturbed till it dries fully. In hot climates it dries within 15 – 30 minutes but at low temperatures and high humidity 1 to 2 hours might be required.