POLYRELEASE

Description

Chemical mould release oil

 

Polyrelease is a chemical release agent applied on mould and shutter surfaces prior to casting concrete. it ensures a smooth and uniform finish to the concrete.

Properties

  • Single component
  • Easy to apply
  • Ensures smooth of uniform finish

Documents and Downloads

Technical Data Sheet
POLYRELEASE
Download TDS

This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region

Step by Step

Action

The alkali reactive chemicals in Polyrelease promote a water repellent interface, which protects both steel and timber formwork, whilst ensuring concrete a smooth, hard and uniform finish with reduced incidence of blow holes. Polyrelease has no negative effect on the properties of concrete nor will it impair the adhesion on subsequent surface treatment when applied at the coverage rates. Polyrelease will not stain the concrete surface.

Application

Forms should be clean and rust free. Apply a thin coating of Polyrelease with a fine brush or a spray unit before casting. Excessive application should be avoided as it is self migrating. Whenever new timber or plywood is used, an initial spray coat should be applied to seal the pores on the surface.

Coverage

The coverage rate of Polyrelease is 30-70 m2/L. this depends on the surface density and porosity of the formwork.