BITUBOARD ULTRA

Description

Fibre impregnated asphaltic protection board

 

Multi layer, asphaltic protection board                                                                                

Properties

  • Non bio-degradable 
  • Weather, warp and rot proof 
  • Tough and durable 
  • Excellent resistance to chemicals 
  • Improved puncture resistance 
  • Compatible with most waterproofing systems

Documents and Downloads

Technical Data Sheet
BITUBOARD ULTRA
Download TDS

This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region

Step by step

The application of Bituboard ULTRA should be carried out when the ambient temperature is between 5°C and 55°C and should avoided in case of extreme weather conditions such as sand storms, rain, etc.

Bituboard ULTRA can be fixed on top of the waterproofing membrane by using a double sided adhesive tape (Watertite TS 15)*, Bitubond N or even by torching (for fixing over torch applied membranes).

Once the protection board is fixed in place, supports/props have to be used to keep the boards in place till the adhesive is strong enough to hold the board. Subsequent boards shall be laid continuously by butt fitting the edges.

For irregular profiles, the board shall be cut to fit all intersections and protrusions.The butt joints can be sealed with 50mm wide HDPE bitumen adhesive strip to prevent any backfill material entering and causing damage to the underlying waterproofing membrane.