AL HOSAN

Description

Roofing felt

 

Al Hosan consists of 2 layers of HDHT polyethylene film with polymer modified bitumen. A unique technology involving polymerization to the polymers used in the blend resulting in a tough yet flexible membrane with excellent elongation properties

Properties

  • Excellent elongation
  • Polymer modification gives long term flexibility in harsh climatic conditions
  • Raditional application for acceptance by on site labour
  • Extremely durable
  • Long term cost efficiency

Documents and Downloads

Technical Data Sheet
AL HOSAN
Download TDS

This TDS is applicable for the United Arab Emirates only. Please contact your local Polybit sales office for the available TDS in your region

Step by Step

Surface preparation 

A smooth, regular and dry surface is always a must for good application. The substrate should be completely free of any protrusions or cavities. The presence of oily substances, frost or other moisture should be completely avoided.

Application

The installation procedures are to be as follows:

  1. Unroll only the required length, and cut the piece to the desired shape and size.
  2. Place the pieces of membrane on the area to be covered, and check whether they match with the profile of the marked substrate.
  3. Al Hosan can be placed either by pour and roll method or by the use of a contact adhesive for vertical areas.
  4. Place a Bituboard on top of the membrane soon after the application in order to prevent any damage from exposure to sunlight, backfilling.